HOME >> Mechanical Industry >> Machine Tool
first prev 1 2 3 4 5 6 7 8 9 10 next last

    • WuDong Z3050*18/Z3050*16 Radial Drilling Machine

      The radial drilling machines, model Z3050×16、Z3050 × 18 is a universal machine, capable of drilling, counterboring, boring, reaming, spot-facing, tapping and other similar operations. It is widely used in machine manufacuring industry for processing small and medium sized machine parts and also suitable for being used in repair shops. Specifications 　Type Z3050×16 Z3050×18 　Max. drilling diameter 50 mm 50 mm 　Distance from the spindle axis to the column 　（Max/Min） 1600 / 350 mm 1800 / 350 mm 　Max. distance of spindle head on arm 1250 mm 1450 mm 　Distance frome spindle nose to working surface 　of base （Max/Min） 1210 / 310 mm 1210 / 310 mm 　Taper of spindle bore（Morse） Morse No.5 Morse No.5 　Max. travel of spindle 315 mm 315 mm 　Number of spindle speeds 16 steps 16 steps 　Range of spindle speeds 25-2000 r.p.m 25-2000 r.p.m 　Feed steps 16 steps 16 steps 　Feed range 0.04-3.2 mm/r 0.04-3.2 mm/r 　Main drive motor power 4 kW 4 kW 　Weight（approx） 3500 kg 4300 kg 　Overall dimensions （L×W×H） 2490×1060×2625 mm 2690×1060×2625 mm

      • Drill Press Radial Drilling Mach Beam drill

    • WuDong Brand WD-40A Vertical drilling machine

      This machine is designed for drilling, counter boring reaming, tapping, spot facing, etc. The maximum drilling capacity is 40mm on small or middle sized workpieces. It is widely used in machine works and repair shops for single piece or small lot production, having the features of abundant horsepower and high rigidity when compared with all the others of its kind at home and abroad. Feature 1. A wide range of spindle speeds can be obtained by setting two levers at the left side of the spindle head in conjunction with tow-speed switch. 2. It has reasonable speed of revolution, there is well cutting property when it drill the bigger hole. 3. Two-speed switch can also permit the spindle to reversely rotate both at high and low speed so as to perform tapping at any speed. 4. All of the levers are locates on the spindle head for the convenient operation. 5. The spindle unit is equipped with the back moving spring and cutter dismounting device. The former can be adjusted to meet the requiremnet of the operator, and the latter is utilized for easily taking off the cutter. 6. The spindle head can be raised, lowered and revolver 360. The elevating mechanisms are acted through the worm and worm wheel gears and rack, thus saving the operator's labour and ensuring safety in self-locking. 7. The motor is mounted in the spindle head and its stator is fitted in the bushing for positioning the motor to facilitate mounting and dismounting in maintenance and repair. The power is transmitted to speed changing mechanism via splinted shaft. 8. All the essential cast parts have undergone artificial ageing, and the principal steel parts as spindle and its sleeve, clutch, drive gears, have been properly heat-treated. Therefore they are more stable and wear-resistant. 　 Specifications 　Max. drilling diameter 40 mm 　Distance from axis of spindle to column generating line 300 mm 　Max. distance from spindle nose to working surface 800 mm 　Max. distance from spindle nose to working surface of base plate 1260 mm 　Max. travel of spindle box 270 mm 　Max. travel of table 550 mm 　Max. travel of spindle 150 mm 　Max. distance from spindle nose to working surface 1200 / 260 mm 　Taper of spindle bore（Morse） Morse No.4 　Range of spindle speeds 52 80 105 160 210 260 320 400 530 800 1100 1650 r.p.m 　Number of spindle speeds 12 steps 　Effective working area of table（L×W） 400×320 mm 　Effective working area of base （L×W） 440×380 mm 　YD100L1-6/4 　Power 1.3/1.8 kw 　2-speed 3-phase 　Voltage 380V 　A.C. motor 　Speed 940/1440 r.p.m 　Overall dimensions （L×W×H） 941×617×1995 mm 　Net Weight 670 kg

      • Vertical drilling ma Upright drill Drill press

    • H5 Brand SB408 Bench Tapping Machine

      Model Sb-408 semi-auto bench tapping machine is a high-efficiency tapping equipment, suitable for parts batch productiong in manufacture of instrument, electric appliance, sewing machine and camera, etc. The maxiumum diameter to be tapped is M8.　 Feature 1. 　The special motor for high-frequnency clockwise and conter-clockwise ratation is adopted and max, tapping ftrquency is 50 times per miunte. 2. 　The feed mechanism with clearance spring is driven by change-gears and is suitable for excruding taps. 3. 　The tappping depth can be adjusted addutely by the tapping-depth-stop. 4. 　The soft tap holder is adopted by the machine, so the tap can be easily exchanged and reliably clamped. 5. 　The main drive and feed drive system are separatel driven by friction clutch, when troubles in processing, the drive chain is automatically cut off. So the tap is protected and undamaged. 6.　The emergency stop button is fixed on the most convenient position, and safety device on the change gears' cover. Thus the operater's safety is guaranteed. 7.　The main electric elements of the machine are selected from well-known brand products of reliable performance, in order the guarantee the machine's long service-life. All of the electric elements are assembled under the working table, which is on the machine base. As a result, it makes easy maintenance possible. 　 Specifications 　Max. tapping diameter 8 mm 　Max. tapping frequency 50 times/minute 　Distance from axis of spindle to column generating line 185 mm 　Max.Distance frome spindle nose to working surface of base 　 355 mm 　Min.Distance frome spindle nose to working surface of base 50 mm 　Max. travel of spindle box 260mm 　Max. travel of spindle 45 mm 　Outer taper of spindle nose D4 short taper 　Spindle speed 1340,750,420rpm 　Effective working area of table 230×226 mm 　Main drive motor power 0.4 kW 　Weight（approx） 105 kg 　Overall dimensions （L×W×H） 675×390×800 mm

      • Bench Tapping Machin Thread machining equ Thread Cutting Machi

    • HuDong Brand BH6070 BH6070 Shaping Machines

      BH6070 Shaping Machines Application BH6070 　This machine is suitablle for shaping plane and formed surfaces. High productivity can be obtained for shaping plane surface, T-slots and dovetail slots, etc, on narrow and long workpieces. 　The ram mechanism of this machine adopts the guide unit with torsion-spring internally fixed. During the ram movement the cutting tool can be adjusted to an arbitrary position. 　The total closed cam-ratchet unit is employed in the feed mechanism and rapid travel mechanism of the table featuring change of feed amounts without stopping the machine during cutting. A disk-type overload safety unit is used. 　Owing to the adoption of swivel device with cam-curve groove different speeds can be selected arbitrarily. Specifications 　Max. shaping length 700 mm 　Max. distance from lower edge of ram to 　table 420 mm 　Max. travel of table 　Horiazontal 630 mm 　Vertical 320 mm 　Rapid travel of table 　Horiazontal 0.75 m/min 　Vertical 0.34 m/min 　Max. vertical travel of tool head 125 mm 　Frequency of ram strokes 11,20,38,52,72, 100 times/min 　Table feed per ram stroke 　Pawl riding over 1 ratchet tooth 　Horiazontal 0.07 mm 　Vertical 0.15 mm 　Pawl riding over 10 ratchet tooth 　Horiazontal 0.68 mm 　Vertical 1.5 mm 　Tool head (down) 0-0.4 mm 　Tool lifting (linear speed) <20 m/min 　Motor 4kW.960 r/min 　Vice measurements （L× W× Max. opening） 240×64×215 mm 　Overall dimensions（L× W× H） 2480×1400×1780 mm 　Packing size（L× W× H） 　Export 2620×1620×1720 mm 　Import 2620×1650×1720 mm 　Net Weight 2700 kg 　Gross Weight 3300 kg

      • Shaping Machines Planer

    • HuDong Brand B6050 Shaping Machines B6050

      This machines is designed for shaping plane and formed surfaces. If used for shaping plane surfaces, T-slots and dovetail slots, etc. On narrow and long workpieces, the machine will obtain much higher productivity. With the equipment of a special vice or a diveding head, the machine can be set for processing the end surfaces and slots with equal distance on cylindrical or rectangular workpieces. Specifications 　Max. shaping length 500 mm 　Max. distance from lower edge of ram to 　table 370 mm 　Max. travel of table 　Horiazontal 500 mm 　Vertical 300 mm 　Max. swivel angle of table 　Without vice ±90° 　With vice ±55° 　Max. vertical travel of tool head 110 mm 　Frequency of ram strokes 15,24,37,51,64,80, 102,126,158 times/min 　Table feed per ram stroke 　Pawl riding over 1 ratchet tooth 　Horiazontal 0.0845 mm 　Vertical 0.133 mm 　Pawl riding over 10 ratchet tooth 　Horiazontal 0.845 mm 　Vertical 1.33 mm 　Motor 3kW1420 r/min 　Vice measurements 　（L× W× Max. opening） 240×64×215 mm 　Overall dimensions（L× W× H） 1943×1160×1533 mm 　Packing size（L× W× H） 　Export 2150×1340×1470 mm 　Import 2210×1450×1470 mm 　Net Weight 1800 kg 　Gross Weight 2100 kg

      • Shaping Machines Planer

    • HuDong Brand B6050 Shaping Machines B6050

      This machines is designed for shaping plane and formed surfaces. If used for shaping plane surfaces, T-slots and dovetail slots, etc. On narrow and long workpieces, the machine will obtain much higher productivity. With the equipment of a special vice or a diveding head, the machine can be set for processing the end surfaces and slots with equal distance on cylindrical or rectangular workpieces. Specifications 　Max. shaping length 500 mm 　Max. distance from lower edge of ram to 　table 370 mm 　Max. travel of table 　Horiazontal 500 mm 　Vertical 300 mm 　Max. swivel angle of table 　Without vice ±90° 　With vice ±55° 　Max. vertical travel of tool head 110 mm 　Frequency of ram strokes 15,24,37,51,64,80, 102,126,158 times/min 　Table feed per ram stroke 　Pawl riding over 1 ratchet tooth 　Horiazontal 0.0845 mm 　Vertical 0.133 mm 　Pawl riding over 10 ratchet tooth 　Horiazontal 0.845 mm 　Vertical 1.33 mm 　Motor 3kW1420 r/min 　Vice measurements 　（L× W× Max. opening） 240×64×215 mm 　Overall dimensions（L× W× H） 1943×1160×1533 mm 　Packing size（L× W× H） 　Export 2150×1340×1470 mm 　Import 2210×1450×1470 mm 　Net Weight 1800 kg 　Gross Weight 2100 kg

      • Shaping Machines Planer

    • HuDong Brand BH6070 BH6070 Shaping Machines

      BH6070 Shaping Machines Application BH6070 　This machine is suitablle for shaping plane and formed surfaces. High productivity can be obtained for shaping plane surface, T-slots and dovetail slots, etc, on narrow and long workpieces. 　The ram mechanism of this machine adopts the guide unit with torsion-spring internally fixed. During the ram movement the cutting tool can be adjusted to an arbitrary position. 　The total closed cam-ratchet unit is employed in the feed mechanism and rapid travel mechanism of the table featuring change of feed amounts without stopping the machine during cutting. A disk-type overload safety unit is used. 　Owing to the adoption of swivel device with cam-curve groove different speeds can be selected arbitrarily. Specifications 　Max. shaping length 700 mm 　Max. distance from lower edge of ram to 　table 420 mm 　Max. travel of table 　Horiazontal 630 mm 　Vertical 320 mm 　Rapid travel of table 　Horiazontal 0.75 m/min 　Vertical 0.34 m/min 　Max. vertical travel of tool head 125 mm 　Frequency of ram strokes 11,20,38,52,72, 100 times/min 　Table feed per ram stroke 　Pawl riding over 1 ratchet tooth 　Horiazontal 0.07 mm 　Vertical 0.15 mm 　Pawl riding over 10 ratchet tooth 　Horiazontal 0.68 mm 　Vertical 1.5 mm 　Tool head (down) 0-0.4 mm 　Tool lifting (linear speed) <20 m/min 　Motor 4kW.960 r/min 　Vice measurements （L× W× Max. opening） 240×64×215 mm 　Overall dimensions（L× W× H） 2480×1400×1780 mm 　Packing size（L× W× H） 　Export 2620×1620×1720 mm 　Import 2620×1650×1720 mm 　Net Weight 2700 kg 　Gross Weight 3300 kg

      • Shaping Machines Planer

    • RTM CT-E600A EXPANDER TOOL

      FEATURES: High capacity provide driving power. Adjustable inside punch for different depth & sizes Auto retract expander heads with alarm functions Different sizes of expander heads available. Easy operation, used for 10mm~42mm. Diameter tubings.

      • EXPANDER TOOL HVACR Flaring Tools

    • RTM CT-274 TUBE CUTTER

      TUBE CUTTER Item No. Article Description Material CT-274 Heavy-Duty Cutter φ1/8″to 1-1/8″(3-28mm) Aluminum alloy body TUBE CUTTER Item No. Article Description Material CT-274 Heavy-Duty Cutter φ1/8″to 1-1/8″(3-28mm) Aluminum alloy body

      • TUBE CUTTER TUBE TOOL FITTING TOOL

    • MG Four Roll Hydraulic Plate Bending Machine

      Italian manufacturer of hydraulic plate bending rolls, manual Three roll double pinch and CNC, four roll hydraulic plate bending machines. Our plate rolls range from 1000mm to 8000mm length, and from 1mm up to 200mm thickness cold rolling. MG are the world leader today with a production of over 320 plate rolls per year with 50% of Europes market share.

      • plate roll plate bending machine plate bending roll

    • MG Plate Bending Rolls

      Italian manufacturer of hydraulic plate bending rolls, manual Three roll double pinch and CNC, four roll hydraulic plate bending machines. Our plate rolls range from 1000mm to 8000mm length, and from 1mm up to 200mm thickness cold rolling. MG are the world leader today with a production of over 320 plate rolls per year with 50% of Europes market share.

      • plater roll plate bending roll hysraulic plate bedning machine

    • Dafu 000 gypsum powder production line,gypsum powder making machine

      With the development of gypsum industry, there is a large demand for quantity and high quality of gypsum powder. Therefore, the high level of gypsum powder production technology is required. In the process of gypsum powder production, drying and dewatering is the key link, which is also the most difficult one to control. In order to solve this problem, we develop a new type of drying and dewatering equipment---ebullience calciner, which is produced based on the exploring of the gypsum production filed. Following is the brief introduction of the gypsum production technology and ebullience calciner working principle.The Crusher will break the big-size gypsum ore into small 25mm pieces, and then the small pieces will be sent to the grinder, after grinding fine, the qualified raw gypsum powder will be sent to boiling furnace to calcine, and the unqualified part will be sent to grinder until its qualified. After calcining, the qualified gypsum powder will be sent to spiral conveyor through hoist. The spiral conveyor will send the calcined gypsum powder to silo for storage, and cool the powder during the process. The dust remover is on the top of silo, the unqualified part will be sent to grinder until its qualified. The stored gypsum will be sent to product storage through steel impeller feeder, spiral conveyor, hoist, and send the qualified gypsum powder to storage or workshop finally. The top pulse bag stype dust remover will collect dust from crusher, particle silo. When the dust and dust gas get into the dust remover through inlet, the big-size dust particle will fall because the increasing size and decreasing wind speed. The small dust particle will be filtered by filter bag. The filtered gas will be got rid of by outlet. Feel free to contact joyfang2009 at hotmail dot com.

      • powder grinder mill gypsum powder plant gypsum powder equipment

    • gongda belt conveyor

      Belt Conveyer: The belt conveyor produced by our company has the strongpoints of large conveying amount, simple structure, easy maintainance, high standardization degree,etc, which is widely used in mining, metallurgy, coal and other industries. The belt conveyor can be used to transfer bulk materials or materials in pieces.According to different transferring requirements, the transferring system can be of only one belt conveyor or consists of several conveyors, or combined with other transferring equipments. The belt conveyor can be installed horizontally or aslope to meet the needs of different transferring requirements.

      • belt conveyor

    • gongda cone crusher

      Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make surereliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

      • crusher cone crusher

    • PD-036 Tattoo power supply

      High-power tattoo power supply Input: AC 220V, 110V automatic conversion Output: DC 0-18V Dual Output Adjustable Dual output: can be accessed by a liner and shader machine

      • TATTOO power supply piercing

    • bench lathe

      bench lathe

      • lathe machine machine tool lathe tool

first 1 2 3 4 5 6 7 8 9 10 last