HOME >> Instrumentation >> Complete Sets of Automation Control System
first prev 1 next last

    • UV-DESIGN UV Meter Black Standard UV Meter Black Standard Series

      UV-Meter Black Standard Series key features: + UV intensity mW/cm锟?+ 2 channel x1/x10 + probe type sensor The UV-Meter Black Standard is a high quality UV measuring instrument. All measurements are expressed in mW/cm2 in order to compare light sources or to check uniformity of the light emission. Typical application fields are the control of units for the exposure of diazo, polymer, chromaline and daylight films in the graphic arts industry, suntan equipment, sterilisation units and other fields of photo bioIogy. The UV-Meter Black Standard is available in five different measuring ranges: (Please state upon order) 6.1.1 UV-Meter Black Standard UV-V (Diazo) 350 - 460 nm 6.1.2 UV-Meter Black Standard UV-A 315 - 400 nm 6.1.3 UV-Meter Black Standard UV-B 280 - 315 nm 6.1.4 UV-Meter Black Standard UV-C 230 - 280 nm 6.1.5 UV-Meter Black Standard Full UV 230 - 410 nm The display readings are fictitiously. The basic setting is done by means of a potentiometer. Technical Data: Max. Power input : sensor input 1000W/cm锟?Wavelength: 315 410 nm UV-A (or other) Temperature: 0 - 45 C Display: 4 Digits Range X 1 : 0 - 199,9 mW/cm锟?Range X 10 : 0 - 1999 mW/cm锟?Weight: approx. 200 grams Battery: 9 Volt Battery Dimensions: 140 mm x 75 mm x 24 mm Sensor cable: 1 meter Sensor 锟?40 mm x 10 mm Base Accuracy: 锟?5 % The probe-type sensor of the UV-Meter can withstand max. 110锟?C / 230锟?F for up to 10 seconds. The temperature of the housing should not exceed 45锟?C / 113锟?F. Calibration: In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration

      • UV Intensity Meter UV Meter Black Standard Series UV Met

    • UV-IR TECHOLOGY

    • Schenck Balancing Machine (HM2/HM50)

      Horizontal Balancing Machine Universally applicable High balancing accuracy Easy upgrading through modular structure and a wide range of accessories Hard-bearing principle ensures fast change-over CAB700 or CAB803 measuring instrument, with extensive operator prompting Full range of safety equipment for all protection classes Product Specification Range of application Universal balancing machines series HM enable precise balancing of a wide spectrum of rotors. They are suitable for cylindrical rotors having their own shaft journals and for balancing disc shaped rotors on balancing arbors. Permanent calibration, ergonomic design and a logical operating sequence facilitate operation. A modular design principle and a wide range of accessories make the machine highly flexible. Schenck universal balancing machines series HM are a highly efficient investment, both for one-off rotors and for small batches. Special features Easy to operate hard-bearing principle eliminates the need for calibration runs Provides for correction in two planes or separate according to static and couple unbalance Rotors can be mounted on their original shafts or on mounting arbors, optionally with mounted anti-friction bearings. Angle indexing display in case of belt drive Automatic measuring cycle with infinitely variable settings for acceleration, measuring and braking time Upgradeable by many additional modules e. G. For mass correction Product parameters Rotor data / Machine Type HM2 HM20 HM3 HM30 Max. rotor diameter above the machine bed mm 800/1260 1260 Max. rotor weight on roller carriages (1) Kg 50 120 300 700 Technical Data with End Drive Length of machine base mm 1500 2500 Distance from coupling flange of drive shaft to centerline of farthest bearing (2) mm 1000 1545 Technical Data with Belt Drive Length of machine base mm 750/1500 1500 Max. distance between bearing center (2) mm 640/1390 1330 Belt drive diameter Under slung belt drive mm 20-300/20-450 20-450 Belt drive diameter Over slung belt drive mm 20-200/50-300 50-300 Rotor data / Machine Type HM4 HM40 HM5 HM50 Max. rotor diameter above the machine bed mm 1600 Max. rotor weight on roller carriages (1) Kg 1940 2100 Technical Data with End Drive Length of machine base mm 3000 Distance from coupling flange of drive shaft to centerline of farthest bearing (2) mm 2020 1980 Technical Data with Belt Drive Length of machine base mm 2000 2500 Max. distance between bearing center (2) mm 1750 2210 Belt drive diameter Under slung belt drive mm 30-600

      • Horizontal Balancing Machine Balancing Machine Balancing Machi

    • Schenck Shanghai Machinery Corp. Ltd.

    • BEST 029 bidirectional amplifier CATV Bidirectional Amplifier

      Summary: Best 029 bidirectional amplifier, with two-way bidirectional outputs, adopts GaAs amplifier and power-doubled module to offer 862MHz forward bandwidth and the reverse bandwidth can be divided flexibly by choosing different bidirectional filter.Features: 1). Nice nonlinearity and high stability2). Two output; splitter and taps are available to choose3). Water-proof and heat-loss aluminum-cast compact shell4). Pre-slope to equalize more than 20dB5). High stability switch power supplyParameters: ParametersUnitSpecificationsForwardReverseAdjustableMHz47/56/87-750/8705-30/42/65Circuit formulaDouble-powered or GaAsPush-pullFlatnessdB±0.75±0.75RF return lossdB≥16≥15ACA10ACdB≥65≥65DC24VA0.70.2Test portdB-20±1.5-20±1.5Rated RF input leveldBuV35@ 5MHZMini GaindB35-3820-24Noise figuredB12Slope dB≤10(0dB equalizing)Time delayns≤105~30≤30 5~65≤20Distortion 59 PAL3 PAL C/CTBdB≥64≥88C/XMdB≥60≥80C/CSOdB≥61≥82

      • optical amplifier CATV Bidirectional Amplifier 029 bidir

    • Zibo Best Optical Communications Co., Ltd.

    • JIBIMED YX-260B Portable Steam Sterilizer

      PORTABLE PRESSURE STEAM STERILIZER YX-260B CHARACTERISTICS 1.The product is heated by the immersed electro-thermal tube. It featured to quick rise temperature and low power consumption (saving about 50% of energy as compares with electric stove).2.The product can also use liquefied petroleum gas and coal stove as the heating energy.3.The container is made of 1Cr18Ni9Ti (stainless steel), which is not only alkali & acid proof but also more than 3 times more tensile and compressive than aluminum alloy, ensuring safety and service life.4.The lid is equipped with the safety valve and air releasing valve. When the steam pressure exceeds 0.16MPa, the safety valve can automatically release the pressure that is too high, having double safety function and featuring safety and reliability in use. The lid is also equipped with a pressure gauge with mega bar and temperature readings, which conveniences the user. TECHNICAL DATA: Model YX-260B sterilizing volume12L(φ240×200 mm) working pressure0.14 -0.16 MPa Max. safety pressure0.165Mpa power / consumptionAC220V.50Hz / 2KW dimension360×360×420 mm N / G. W11 / 12 KG

      • autoclave Portable Steam Sterilizer YX-260B Description

    • Jiangyin Binjiang Medical Equipment Co., Ltd.

    • SM3-004 SM3-004 MX5 Exhaust Down Pipe for MAZDA

      Model Number: SM3-0041) For MAZDA Miata MX5 90 91 92 932) Uses Stainless Steel material3) CNC flange4) Mirror polished5)Gaskets and hardware included6) Accept customized orders to meet your specific requirements7) samples can be arranged 10 days after your confirm

      • down pipe MX5 Exhaust Down Pipe for MAZDA SM3-004 Descr

    • Ningbo Smart Industrial Co., Ltd.

    • Cu-035 Cushion

      Features: 1) Material: 100% cotton, embroidered, 100% polyester 2) Sizes: 45 x 45cm, 50 x 50cm or as per client's request 3) Fashionable and elegant styles 4) Light and thick fabrics are available 5) Many color and designs 6) Outstanding quality and great service Packing: As per customers' demands

      • cushion Cushion Cu-035 Description Features Details

    • Sunway Textile (Nantong) Co., Ltd.

    • SM1-031 exhaust manifold

      Product name: Exhaust manifold 3000GTPart No.: 3000GTModel No.: SM1-031APPLICATION: MITSUBISHI 3000GT TURBO MANIFOLD 94-99 Key Specifications/Special Features:1) High performance turbo manifold2) Uses stainless steel material3) CNC flange TIG welded4) Mirror polished TURBO MANIFOLD5) Accept customized orders to meet your specific requirements6) Samples can be arranged 10 days after your confirm

      • exhaust manifold exhaust manifold SM1-031 Description

    • Ningbo Smart Industrial Co., Ltd.

    • 23410-23511 Piston

      Beijing Gallop-world Economy & Trade Co., Ltd, established in 1996, the subsidiary company of Beijing Caliland Industry Corporation, is a manufacturer and exporter specializing in OEM as well as aftermarket auto parts for South Korean automobiles (HYUNDAI KIA DAEWOO and SSANGYONG),at the same time ,we also do vehicle parts for all other cars.We have achieved ISO9000 since 1998 and been in the process to ISO/TS16949, meanwhile, gained technical support from HYUNDAI, DAEWOO and BENZ. GRTW, our trademark, has been registered in Germany, Japan, Korea and the United states. Our products are expanding to Europe, Russian Independent and Asia. We are acclaimed in terms of the quality of our products and the service we provide. Pragmatically and insightfully, weve gradually perfected our marketing channel and aftermarket service system and taken a leading role in auto parts markets. Overseas markets also acclaim us for our competitive price, the best quality and satisfying service.We always focus on quality and innovation to satisfy our customers all around the world.The truth is our principal.Your satisfaction is our promiseInnovation is our theme forever.Do everything that we can do is our belief. We tend to build long-term relationship with our buyers and expect your cooperation with us. We think you can get the best interest from our company . Tel: 86-10-67208734--808Fax:86-10-88871728/29--808Mobile86-15811227468

      • Piston Piston 23410-23511 Description Features Detail

    • Beijing Gallop-World Economy & Trade Co., Ltd.

    • GRTW ACCENT 23410-22712 PISTO PIN ASSY

      Our company produce PISTON&PIN ASSY and others autoparts for HYUNDAI , MOTOR , DAEWOO , SSANGYONG , CHEVROLET , PEUGEOT .We mainly supply shock absorber , ball joint , suspension , clutch , and rubberparts for HYUNDAI , MOTOR , DAEWOO , SSANGYONG ,CHEVROLET , PEUGEOT .Our produce has got the ISO9000 standards and proceed TS16949 ,at the same time the quality is the best and the price is suitful.The apperence of autoparts is good .We have different kinds of autoparts so you have many option for our production .

      • PISTON PISTO&PIN ASSY ACCENT 23410-22712 Description F

    • Beijing Gallop-World Economy & Trade Co., Ltd.

first 1 last