HOME >> Mechanical Industry >> Blower Exhaust Equipment
first prev 1 2 3 4 5 6 7 8 9 10 next last

    • Fan Heater

      Features:CX-QNQ-20-11:1) Voltage: 220-240V2) Frequency: 50Hz3) 2 heating powers: 1,000W or 2,000W4) Cool blow5) Adjustable room thermostat6) Safe thermostat7) Anti-frost protection8) Indicator light9) Integral carry handle10) Version of 3,000W is availableOuter packing: Carton dimensions: 22.5 x 14 x 26.5cmN.W.: 1.6kgG.W.: 1.8kgConveyance: Qty/20' FCL: 2,940pcsQty/40' FCL: 6,060pcsQty/40' HQ: 6,960pcs

      • fan heater Fan Heater Description Features Details

    • Ningbo Caixing Electric Appliance Factory

    • CX-QNQ-20-10 Fan Heater

      Features: CX-QNQ-20-10:1) Voltage: 220-240V2) Frequency: 50Hz3) 2 heating powers: 1,000W or 2,000W4) Cool blow5) Adjustable room thermostat6) Safe thermostat7) Anti-frost protection8) Indicator light9) Integral carry handle10) Version of 3,000W is availableOuter packing: Carton dimensions: 23.5 x 14 x 27.5cmN.W.: 1.6kgG.W.: 1.8kgConveyance: Qty/20' FCL: 3,000pcsQty/40' FCL: 6,120pcsQty/40' HQ: 7,110pcs

      • fan heater Fan Heater CX-QNQ-20-10 Description Features Det

    • Ningbo Caixing Electric Appliance Factory

    • CX-QNQ-20-12/20-12V PTC Fan Heater

      CX-QNQ-20-12V:1) Voltage: 220-240V2) Frequency: 50Hz3) 2 heat settings: 800W/1,500W4) Adjustable thermostat control5) Wide angle oscillation for perfect airflow distribution6) Power indicator light7) Overheat safe cut-out8) Safe tip-over switch9) Cool airflow summer use Outer packing: Carton dimensions: 22 x 18.5 x 32.4cm N.W.: 2.1kgG.W.: 2.5KgConveyance: Qty/20' FCL: 2,000pcsQty/40' FCL: 4,100pcsQty/40' HQ: 5,200pcsCX-QNQ-20-12:1) Voltage: 220-240V2) Frequency: 50Hz3) 2 heat settings: 800W/1,500W4) Adjustable thermostat control5) Power indicator light6) Overheat safe cut-out7) Safe tip-over switch8) Cool airflow summer use Outer packing: Carton dimensions: 22 x 18.5 x 32.4cm N.W.: 2.1kgG.W.: 2.5KgConveyance: Qty/20' FCL: 2,000pcsQty/40' FCL: 4,100pcsQty/40' HQ: 5,200pcs

      • PTC ceramic heater PTC Fan Heater CX-QNQ-20-12/20-12V Descrip

    • Ningbo Caixing Electric Appliance Factory

    • HP1552 High-Power Ceramic Bathroom Fan Heater

      Two-heat setting 900 1,500W bathroom fan heater
      Ceramic heating element
      Thermostat with anti-freeze feature
      Power indicator with light
      Safety overheat cut-off protection
      Warm and fast towel drying
      Wall-mounted
      Ideal for bathroom laundry
      Towel dryer rack
      One hour timer

      • High-Power Ceramic Bathroom Fan Heater with Overheat Protectio

    • Waon Development Limited

    • UM605 Ultra-Sonic Humidifier

      Ultra-sonic humidifier
      6.5L transparent water tank
      Removable water tank with handle
      Noiseless and energy saving
      Humidifier capacity: 400ml hour
      Adjustable mist intensity
      Low water level transducer cut-off protection
      Water tank removed power cut-off protection
      Demineralize filter also available

      • Ultra-Sonic Humidifier with Adjustable Mist Intensity Hong Ko

    • Waon Development Limited

    • Genuin APC10D Ventilation Fan

      Slim body
      With fireproof function
      The shutter is operated (on and off) by electromagnetic valve
      Quick and easy to operate
      Rating voltage: 220V
      Rating frequency: 50Hz
      Power: 11W
      Air delivery: 84 cubic meter h
      Noise: 43.5dB
      OEM and ODM orders are welcome

      • Ventilation Fan with Fireproof Function 220V/11W Power China

    • Guangdong Genuin Electric Co. Ltd.

    • Genuin APC15E Window-mounted Ventilation Fan

      Arc slim design and streamlined appearance
      Option: standard, pull-cord switch, timer, infrared sensor, remote control, and humidistat
      Low noise and longer lifespan
      Available in various color
      Material: ABS plastic louvers
      Easy and quick installation
      Safety approvals: CE, CSA, GS, T-MARK, TUV, UL, SASO, and CCEE

      • Window-mounted Ventilation Fan with ABS Plastic Louvers Materi

    • Guangdong Genuin Electric Co. Ltd.

    • Genuin BPT12-02D2 Multifunction Ventilating Fan

      Material: ABS plastic louver
      Strength SAN plastic lamp chimney provide changeless color and invariable shape
      Ceiling ducted fans
      Better weather resistance
      Double use: lighting and ventilating
      OEM and ODM orders are welcome
      Safety quality approvals: CE, CSA, UL and HVI

      • Multifunction Ventilating Fan with ABS Plastic Louver and Weat

    • Guangdong Genuin Electric Co. Ltd.

    • Porcelain Vase And Bottle Celadon Porcelain Vase

      It is very delicate and complex to manufacture Celadon for 500years. It takes about 60~70 days from selecting clay, forming, setting, engraving, to firing. First Firing needs 800 Degrees C. and second Firing 1, 300 Degrees C. So it is necessary to fee a fire for Firing for about 2~3 days. And in order to reflect mysterious colors, Firing, Clay, and glaze should be properly mixed. Little changes can result in inferior Celadon. It is so hard to select any procedure in Celadon making. So it is difficult to manufacture even one surpassing Celadon. As Goryeo Celadon Porcelain is the representative porcelain art work of Korea, which can be called as one of the most boastful in korean cultural art history, the inlaid pattern in celadon blue is expressed as the perfection of technology and beauty, which is praised as the state of blue sky parting from human art. 80% of treasure-level celadon porcelains of Korea were produced in Gangjin, and most of the fine works preserved as the precious articles all over the world are the works of Gangjin. The reasons why Gangjin could bloom the celadon porcelain culture as the distributing center, as 188 units of old kiln places among 400 ones found nationwide exist in Gangjin, are based on the facts that the marine transportation was well developed and that the conditions such as earth material, fuel, water quality, climate and etc. were proper.

      • Celadon Porcelain Vase Celadon Porcelain Vase Porcelain Vas

    • sycamore,co

    • Temporary Tattoo Kiosk

      Body Art temporary tattoo has used modern technology to turn the art of airbrush tattooing into a practical & profitable bussiness. Our temporary airbrush tattooing process utilizes safe and non-toxic materials, and in addition, is quick, easy and painless.With proper care, an airbrush tattoo will adhere to the skin for about one week - even with exposure to water,but can be removed if wanted.

      • Temporary Tattoo Kiosk Temporary Tattoo Kiosk Description

    • coolex industries pvt ltd

    • FUYALID centrifugal ventilator

      FRP is a new-type composite material which made by glass fibre as strengthen material,synthetic resin as binder and through several process such as: shaping,solidification etc.The follwing is characters of FRP:proportion is small,steady performance is high,heat intersity is steady,performance of electric and soundproof is best,corrosion resistant,resist magnetism. It is the best ventilator material and energy conservation material at present. The FRP anticentripetal ventilator is made after absorbing the technology of Japanese FRP anticentripetal ventilator.Chassis, impeller and enter wind device produce with glass, suitable for petroleum, chemical industry, smelting, electroplating, sewage disposal, make wine, textile, chemical industry, electron, scientific research,etc. department make to arrange hand over,exchange air.The efficient is high, noise is low, pressure curve steady, antiseptic energy-conservation, install convenient, scope of application broad characteristic. VERSION The FRP anticentripetal centrifugal ventilator divided to A,C,and D three joinning mode. A type unite transmission direct with motor, C type link transmission with belt pulley, D type link transmission with shaft coupling by transmission group,matched with the domestic series of Y three-phase motor. The anticentripetal ventilator have 2.8A-6A,6D-12D,6C-12C fifteen version.They are divided to dextrorotation and levoduction two kinds.From one electrical machinery end to look, we call dextrorotation ventilator that impeller rotate in clockwise direction;on the controry we call it levoduction ventilator. STRUCTURE The FRP anticentripetal ventilator 2.8A-6A is made of leaf-wheel,encloser,windsender,machine support and motor.6D-12D,6C-12C has transmission system. 1. It is after being from 10 piece in impeller it is curved for wing type blades, garden arc types record with after record form, Produce with the glass fibre reinforced plastic, smooth obstruction is lost lightly on the surface, one is streamlined structure that the structure compactness, whole gas flow, Have improved the motive force performance of air. 2.Chassis adopt glass fibre reinforced plastic whole shaping also with person who enters wind, collect person who flow for round arc curved surface, The impeller enters the wind even in speed, guarantee the working efficiency of the impeller 3.! The chassis of the air blower, electrical machinery are fixed on the framework with the bolt , have good globality. No6C-12C, 6D-12D air blower adopt the transmission group with 4-72 air blowers of metal of the number of the machine. NOTE OF INSTALLATION 1.The air blower is transported and ship to move by the road , every part must be through checking in detail , Can installation, place of installing, it should consider device safe protection equipment. So as not to influence air blower service life. 2.The foundation that the ventilator is installed had better be corrected with the level, make the framework and foundation identical naturally. It is in case that out of shape not to force and link. The air blower can also be installed and had in various kinds of shock attenuation pedestals 3.In the course of installing, operate carefully, avoid clashing, make every part link reliable, regulate impeller and with minimum enter interval of wind device , can't touch and wipe . 4.Pipeline should add and support, prevent from weight add and state from air blower, cause air blower not to be out of shape, Cause and damage 5 Must stir the impeller to rotate with hands before taking a trial run, check impeller and other position are gritted or not and check the rotatory direction of the electrical machinery , prevent the impeller from overturning. 6. when turning round,must prevent sucking the solid impurity definitely, user can in air blower exit place installs and protects the filter to prevent sucking the chassis to meet accident. 7. During the using ,should overhaul regularly, remove the dirt and keep the good function state.When release give moisture on the body user can snail a φ5 hole on the bottom of snail to drain off water automatically.

      • centrifugal ventilator centrifugal fan exhust fan

    • FUYALID centrifugal fan

      FRP is a new-type composite material which made by glass fibre as strengthen material,synthetic resin as binder and through several process such as: shaping,solidification etc.The follwing is characters of FRP:proportion is small,steady performance is high,heat intersity is steady,performance of electric and soundproof is best,corrosion resistant,resist magnetism. It is the best ventilator material and energy conservation material at present. The FRP anticentripetal ventilator is made after absorbing the technology of Japanese FRP anticentripetal ventilator.Chassis, impeller and enter wind device produce with glass, suitable for petroleum, chemical industry, smelting, electroplating, sewage disposal, make wine, textile, chemical industry, electron, scientific research,etc. department make to arrange hand over,exchange air.The efficient is high, noise is low, pressure curve steady, antiseptic energy-conservation, install convenient, scope of application broad characteristic. VERSION The FRP anticentripetal centrifugal ventilator divided to A,C,and D three joinning mode. A type unite transmission direct with motor, C type link transmission with belt pulley, D type link transmission with shaft coupling by transmission group,matched with the domestic series of Y three-phase motor. The anticentripetal ventilator have 2.8A-6A,6D-12D,6C-12C fifteen version.They are divided to dextrorotation and levoduction two kinds.From one electrical machinery end to look, we call dextrorotation ventilator that impeller rotate in clockwise direction;on the controry we call it levoduction ventilator. STRUCTURE The S4-72 type FRP anticentripetal ventilator 2.8A-6A is made of leaf-wheel,encloser,windsender,machine support and motor.6D-12D,6C-12C has transmission system. 1. It is after being from 10 piece in impeller it is curved for wing type blades, garden arc types record with after record form, Produce with the glass fibre reinforced plastic, smooth obstruction is lost lightly on the surface, one is streamlined structure that the structure compactness, whole gas flow, Have improved the motive force performance of air. 2.Chassis adopt glass fibre reinforced plastic whole shaping also with person who enters wind, collect person who flow for round arc curved surface, The impeller enters the wind even in speed, guarantee the working efficiency of the impeller 3.! The chassis of the air blower, electrical machinery are fixed on the framework with the bolt , have good globality. No6C-12C, 6D-12D air blower adopt the transmission group with 4-72 air blowers of metal of the number of the machine. NOTE OF INSTALLATION 1.The air blower is transported and ship to move by the road , every part must be through checking in detail , Can installation, place of installing, it should consider device safe protection equipment. So as not to influence air blower service life. 2.The foundation that the ventilator is installed had better be corrected with the level, make the framework and foundation identical naturally. It is in case that out of shape not to force and link. The air blower can also be installed and had in various kinds of shock attenuation pedestals 3.In the course of installing, operate carefully, avoid clashing, make every part link reliable, regulate impeller and with minimum enter interval of wind device , can't touch and wipe . 4.Pipeline should add and support, prevent from weight add and state from air blower, cause air blower not to be out of shape, Cause and damage 5 Must stir the impeller to rotate with hands before taking a trial run, check impeller and other position are gritted or not and check the rotatory direction of the electrical machinery , prevent the impeller from overturning. 6. when turning round,must prevent sucking the solid impurity definitely, user can in air blower exit place installs and protects the filter to prevent sucking the chassis to meet accident. 7. During the using ,should overhaul regularly, remove the dirt and keep the good function state.When release give moisture on the body user can snail a φ5 hole on the bottom of snail to drain off water automatically.

      • centrifugal fan centrifugal ventialtor exhuaust fan

    • airdow ADA801 Air Ventilation System/Ventilation

      Air window central fresh air ventilation system Total solution for the indoor air quality German motor is applied for high airflow, low noise, energy-conservation and stepless speed regulation High airflow: more than 300m3/hour, exhausting the polluted air continuously Low noise level: less than 35dB(A) Enjoy the natural fresh air and comfortable sleeping without noise trouble Energy conservation: only 0.72W consumed after a 24 hours operation continuously Stepless speed regulation: stepless speed regulation provides with the optimum choice for the balance between the airflow and environment demands Energy-conservation and the user-friendly Chief Engineer Mr Wallin, ventilation expert from Sweden, is leading the design and production for a new series of high-efficiency and engery- conservation Ventilation Systems for the global market. Excellent German motor is applied for high airflow, low noise, engery- conservation and stepless speed regulation High Airflow: More than 300m3/h, exhausting the polluted air continuously. Low Noise Level：Less than 35dB(A). Enjoy the natural fresh air and comfortable sleeping without noise trouble. Engery Conservation：Only 0.72 Watts consumed after a 24hours' operation continously. Stepless Speed Regulation：Stepless speed regulation provides consumers with the optimum choice for the best balance between the airflow and enveironment demands. This is the best way for the design of engery- conservation and the user-friendly.

      • Ventilation

    • ADA Air Purifier & Air Cleaner(Xiamen) Co., Ltd.

    • Titanium Centrifugal Blower

      TiTaN designs and builds Blowers for all types of commercial and industrial applications. We are the leading manufacturers & suppliers of blowers since for a long time. We offers hot gas blower, flue gas blower, wet chlorine blower, sodium hypo blower, exhaust blower, SO2 blower, furnace blower, Titanium grade 7 acid regeneration blower. The range of blowers we supply are petro chemical industrial fans, formic acid plant blowers, caustic soda plant blower, pharmaceutical industrial fan, chemical blowers for refinery, fertilizer plant blower, pulp & paper industrial fans, acetic acid plant fan , food processing unit blowers and marine industrial blowers. We offer construction of rubber lined blowers, solid metal blower, metal lined blower by using Titanium, Tantalum, Zirconium, Nickel, Duplex and Hastelloy metals.

      • chemical process industrial blowers hot gas blower flue gas blower, wet chlorine blower

first 1 2 3 4 5 6 7 8 9 10 last